The DUTY CUT Package

Was: $275.00
Now: $250.00
(195 reviews) Write a Review

The Duty Cut Package is a no frills, no BS, upgrade package for your Glock handgun.

 

Standard features include

-Your choice of Optic Cut (including iron sight configuration)

-Enhanced Rear Serrations

-Factory roll marks removed

-Aggressive Angled Front Serrations (Vertical serrations will be cut on factory FS models such as the 43X or 48)

-Sawtooth Top Serrations

-Edge Chamfers (except 30S/36/34/35 models)

195 Reviews

  • 5
    Awesome Design

    Posted by Chris K on Nov 13th 2023

    Very slick and functional design. The turn around time was very short compared to what I've seen on other sites. The machining and nitride coating is superb and no complaints. I sent in my SRO with my G45 slide & got the "RMR to the rear" cut. maple mounted it and provided additional screws on the side in a very nice tin case. Before making the order they were very patient and easy to work with on what package I wanted, and constantly made sure I was happy through the process. As far as my first experience with sending in a slide, I got to say this was pretty damn awesome. Thank you to the team at Maple leaf for taking care of my slide needs!

  • 5
    Duty cut G19c

    Posted by STG on Nov 13th 2023

    For the $ this imho is the best optic/slide cut package you can get. Being my 2nd one, I am very pleased and impressed with the cut on the top - highly recommend

  • 5
    Absolutely perfect work and nitriding

    Posted by Justin on Oct 26th 2023

    Extraordinarily clean work and perfect nitride finishing. Everything is right and tight, and the milling design is exquisite -- aggressive without looking to xtreme bro-ey. As an FYI, please note that optics installed by Maple Leaf will always be torqued to spec, but may have or may not have some sort of locker applied to the threads of the hardware. Since every gun and optic interfaces differently with respect to thread length/depth, some of the hardware they use has pre-applied nylock while others will have none. Best to e-mail directly and ask. I, for one, am a proponent of applying a bead of thread locker on all optics hardware, so I just knew to apply blue loctite myself to my EPS installed on my Glock 17 slide.

  • 5
    Duty cut

    Posted by Brad on Sep 16th 2023

    Wow!

  • 5
    Duty Cut

    Posted by Carl on Aug 28th 2023

    Looking good

  • 5
    Excellent quality and value!

    Posted by Jakob on Jul 1st 2023

    I was recommended to Maple Leaf by a coworker that had their Glock milled by them, and boy am I glad I gave it a try! The value for the amount of work done to my plain slide for the cost of the package was great (most places I looked at would charge $150+ for just milling for an optic, with added cost for refinishing the slide), and the quality of the cuts were spot on and made for a seamless install. Their customer service was great about answering my questions before I sent my slide in, and the end result is perfect. All of the cuts on the muzzle end are good and sharp (in a good way), they even chamfered the squared off muzzle area too. Not to mention doing the disassembly and reassembly of the slide components and installing the sights I purchased for me without any additional charge, and even sent the old sights back too. And the cut for the optic? Such a perfect fit for my 508T that I had to remove some of the wrap I had put on it just for it to fit on the slide, it's that exact. Seriously can't say enough good things about the work you guys did, and my coworkers are all jealous!

  • 5
    Duty Cut pkg with EPS Optics cut

    Posted by Sterling on May 14th 2023

    First, delivery times were exactly as listed. The day I was going to call to check status (6wks), I got email with tracking #. Was told 4 wks plus up to 2 weeks for the nitrate refinishing, and 6 weeks total it was.
    Slide work was perfect. No burrs, no chatter marks on front or top serrations. Sent note that this G19 Gen3 was running a Radian Afterburner & Ramjet barrel/Comp combo, so they did not do the front chamfer that is typically done for slides running without comps. The optics cut for the Holosun EPS was great. Pretty much an interference fit, it's that tight. taking time and keeping optic as level as possible while seating it 3 times before it was secured with the supplied screws. The optic is going nowhere, trust me.
    Fit, finish, and execution of teh work is all top notch.
    So much so, my 43x will be heading to Maple Leaf FA's for its EPS carry cut and nitrate refinish. Thanks again to Ronnie for answering all my questions before I sent my G19 slide. You will be having another repeat customer. Maple Leaf FA Slide work & Optics cut pic 2

  • 5
    Glock27gen3

    Posted by Gene Labelle on May 1st 2023

    The duty cut is bye far one of the best upgrades Maple leaf costumes knocked it out of the park! Excellent communication and excellent service. Thank you very much job well done.!

  • 5
    G19X with EPS

    Posted by James Ivens on Apr 25th 2023

    Once again, an outstanding Job. Glock FDE looks great on the 19X. Excellent serrations and fitment of the Optic. 2nd time getting the duty cut package.