Optic Adapter Plate - Sig P365X/XL/XMacro to Trijicon RMRcc

(No reviews yet) Write a Review


This plate is compatible with the Sig P365X, Sig P365XL and Sig P365 XMacro slides only.

Each plate will ship with one set of M3x.5x8mm screws to secure the plate to the slide, and one pair of 5-40x.375 screws to secure RMRcc to the adapter plate.

Our adapter plate is CNC machined from billet 7075 aluminum alloy (almost twice as strong as the more common and cheaper 6061 Aluminum) and Type 3 hardcoat anodized black. To minimize unnecessary weight, the plate has had as much material machined away as possible without sacrificing any structural integrity.

Installation Instructions:

1. Ensure firearm is completely unloaded.

2. Secure plate to slide using M3x.5 screws - 10IP Driver - 12in/lb (clear bag).

3. Secure RMRcc optic to plate using 5-40x.375 screws - 10IP Driver - 12in/lb (red bag)

4. A small amount of Blue Loctite may be used. NOTE: DO NOT USE RED LOCTITE!

5. Use driver size and torque spec listed on bag.


Tools Required:

-10IP Driver

-Blue Loctite